SP-01 and SP-02 Pneumatic Power Pack-Medium Duty

Resourses

SP-01 and SP-02 Pneumatic Power Packs and Jaws - Medium Duty

The SP-01 and SP-02 Pneumatic Power Packs are light weight tools for medium duty applications. Both power packs can be used with any of the jaws shown on this page. The specifications for the Power Packs will be detailed in the tab sections at the bottom of the page.

Both power packs are available as either lever actuated or configured for remote footswitch control (SP-01-F or SP-02F)

The power packs and jaws are ordered separately.

Both power packs operate on air pressure from 60-100 psi.

To insure you are receiving the best tool configuration for your application, we suggest you contact us to discuss your application and make a recommendation. It's often recommended that samples of your parts or material be sent to us for evaluation and testing prior to ordering.

Note: For customers outside of the U.S., these tools do NOT carry EU or CE certification

Request Information

Cutting Jaws for use with SP-01 and SP-02 Power Packs

METAL CUTTING JAWS FOR SP-01 and SP-02 Power Packs

CD-1CH Cutting Jaw, Semi-Flush, Case Hardened


Catalog No.	CD-1CH
Cut Style	Semi-Flush
Semi-Flush Rise	0.007"
Jaw Angle	45^o
Length of Cut	0.43"
Max Tip Opening	0.20"
Cutting Edge	Side Cut
Cutting Recommendation	Soft Wire, 0.06" Max

CD-11CH Cutting Jaw, Full Flush, Case Hardened


Catalog No.	CD-11CH
Cut Style	Full Flush
Flush Rise	0.0
Jaw Angle	45^o
Length of Cut	0.43"
Max Tip Opening	0.20"
Cutting Edge	Side Cut
Cutting Recommendation	Soft Wire, 0.06" Max

CD-3CH Cutting Jaw, Semi-Flush, Case Hardened


Catalog No.	CD-3CH
Cut Style	Semi-Flush
Semi-Flush Rise	0.007"
Jaw Angle	15^o
Length of Cut	0.83"
Max Tip Opening	0.30"
Cutting Edge	Side Cut
Cutting Recommendation	Soft Wire, 0.05"

CD-31CH Cutting Jaw, Full Flush, Case Hardened


Catalog No.	CD-31CH
Cut Style	Full Flush
Flush Rise	0.0
Jaw Angle	15^o
Length of Cut	0.83"
Max Tip Opening	0.30"
Cutting Edge	Side Cut
Cutting Recommendation	Soft Wire, 0.05"

Additional cutting jaws for SP-01 and SP-02 Power Packs

Additional metal cutting jaws for SP-01 and SP-02 Power Packs

CD-4CH Cutting Jaw, Semi-Flush, Center Cut, Case Hardened


Catalog No	CD-4CH
Cut Style	Semi-Flush
Cut Rise	N/A
Jaw Angle	Straight
Length of Cut	0.50"
Max Tip Opening	0.19"
Cutting Edge	Center Cut
Cutting Recommendation	Soft Wire, 0.08"

FS-1CH Shear Cutting Jaw, Center Cut, Case Hardened


Catalog No	FS-1CH
Cut Style	Shear Cut
Cut Rise	N/A
Jaw Angle	Straight
Length of Cut	0.50"
Max Tip Opening	0.21"
Cutting Edge	Shear Cut
Cutting Recommendation	Fine wire, Nickel ribbon

FS-1-Carbide Shear Cutting Jaw, Center Cut, Case Hardened


Catalog No	FS-1-Carbide
Cut Style	Shear Cut
Cut Rise	N/A
Jaw Angle	Straight
Length of Cut	0.50"
Max Tip Opening	0.21"
Cutting Edge	Shear Cut
Cutting Recommendation	Hard wire up to 0.10"

SJ-1A Blank Jaw, Unhardened. Customer can machine as needed


Catalog No	SJ-1A
Cut Style	N/A
Cut Rise	N/A
Jaw Angle	Straight
Jaw Thickness	0.30"
Max Tip Opening	0.39"
Cutting Edge	N/A
Cutting Recommendation	Cut, Crimp or Hold

Cutting Jaws for Plastic Applications only

Cutting Jaws for Plastic Applications Only

PGC-2CH Cutting Jaw for Plastics, Straight


Catalog No	PGC-2CH
Jaw Angle	18^o
Length of Cut	7/8"
Cut Type	Flush Cut
Maximum Opening	31/64"
Cutting Recommendations	Cuts most plastics

PGC-2-45 Cutting Jaw for Plastics, 45 deg


Catalog No	PGC-2-45
Jaw Angle	45^o
Length of Cut	5/64"
Cut Type	Flush Cut
Maximum Opening	29/64"
Cutting Recommendations	Cuts most plastics

PGC-2-60 Cutting Jaw for Plastics, 60 deg


Catalog No	PGC-2-60
Jaw Angle	45^o
Length of Cut	5/64"
Cut Type	Flush Cut
Maximum Opening	29/64"
Cutting Recommendations	Cuts most plastics

PGC-2-90 Cutting Jaw for Plastics, 90 deg


Catalog No	PGC-2-90
Jaw Angle	90^o
Length of Cut	1"
Cut Type	Flush Cut
Maximum Opening	23/64"
Cutting Recommendations	Cuts most plastics

SP-01: Hand Lever Control Power Pack and Jaw Housing

SP-01-F: Remote Footswitch Control Power Pack and Jaw Housing

Dimensions: 5-1/2" L x 1-1/2" Dia

Weight: 11 oz.

Cutting Force @ 80 psi: 575 lbs.

Air Pressure Range: 60-100 psi

SP-02: Hand Lever Control Power Pack and Jaw Housing

SP-02-F: Remote Footswitch Control Power Pack and Jaw Housing

Dimension: 5-1/2" L x 1.75" Dia

Weight: SP-01 9 oz.

Max Cutting Force @ 80 psi: 100 lbs

Air Pressure Required: 60-80 PSI

Note: For customers outside of the U.S., these tools do NOT carry EU or CE certification

SP-01: Hand Lever Control Power Pack and Jaw Housing

SP-01-F: Remote Foot Switch control with Jaw Housing.

Jaws and Foot Switch sold separately

SP-02: Hand Lever Control Power Pack and Jaw Housing

SP-02-F: Remote Foot Switch control with Jaw Housing

Jaws and Foot Switch sold separately

Industrial Pneumatic Tool Catalog

Electronics Pneumatic Tool Catalog

Plastics Pneumatic Tool Catalog

Power Pack Maintenance

Repair Parts Drawing - SP-01 Power Packs

Repair Parts Drawing - SP-02 Power Pack

No Video Files Available

PNEUMATIC TOOL WARRANTY DOCUMENT

If you are looking for any of the pneumatic tools detailed on this website to replace a manual tool, we recommend the following procedure:

1. The fastest method is to give us a call so we can discuss your application in detail and make a recommendation. Toll Free U.S. / Canada: 888-444-1202.

2. If emailing your request, please be sure to provide as much information as possible regarding the application, including material specifications, cycles performed per day, photos or video of the process and tool that you currently use, drawing models (.stp format) if available, etc. Refer to the Contact Us tab at the top of the website and direct your inquiry to customer service.

3. In many cases, we will request that you send us samples of the material or parts you will be processing with the pneumatic tool so we can confirm the tool performance before you purchase. The testing process is available to all customers at no cost. This assures all parties that the correct tool is specified for the application.

4. You can also contact us via the chat line on the website. The chat box will be located in the lower right corner of your screen.

If you require a modification to a standard tool, or a very specific custom tool to meet your production or assembly process, we can be of service.

Follow this link to the "custom tool" pages where a variety of examples are presented. Custom Pneumatic Tools Note that ALL of the tools in this product section were designed and built to meet a specific customer application and carry a unique part number for that customer. These are NOT stock or production tools. Any custom tool built specifically for a customer's application will be assigned a unique part number designating the custom design for that tool only.

The procedure to follow for tool modifications or custom tools is as follows:

1. The best option is to contact us by phone so we can discuss your application in detail to determine if your tool requirement fits within our capabilities.

2. If you prefer email, please provide us with as much information as possible regarding your application, material or parts being processed, photos, video, solid model drawings, etc., so we get a clear understanding of your requirements. Emails should be directed to customer service (See Contact Us at the top of the page)

3. We will most likely request samples of your parts for testing or evaluation prior to providing a quote. Assuming we determine a tool design is a good fit, we will provide you with a quote for review and acceptance.

4. Once a purchase order has been issued, the final design is completed and scheduled for production. Prior to production beginning, we will provide you with a tool drawing for your review, acceptance and signature. Upon confirmation of drawing approval, the tool will be entered into the production schedule.

5. Please note: Lead time for Custom Tools is 6-9 weeks after acceptance of the purchase order and tool drawing.

6. All custom tool orders are non-cancellable once actual production has begun.